Electrical safety is a very important factor if you want to live in your house without the risk of any electrocution incidents. Loose wires, broken switches and circuits that do not work properly are a cause of short circuits. In serious situations, this can even cause a fire. Home owners should follow the steps given below to maintain the highest steps of electrical safety.
A main switch box with reliable breakers
A main switch box is placed at the beginning of the house. From this box, electronic connections are given for the entire house. If there is a voltage fluctuation, the entire burden is exerted on these connections. To prevent any wires from being burnt or sparks, you should use a switch box with dependable breakers. Breakers are switches which stop working if there is a power fluctuation but prevent any load from being exerted on the main circuit. House owners should make sure that a reliable main switch box system is installed and it should be checked by an expert from time to time.
Get the condition of outdoor wires checked on monthly basis
Wires on the outdoor side of the house get exposed to sun light and melt due to continuous heat exposure. Even if your wires have protective coating, their condition would decline gradually. On monthly basis, you should get these wires checked so that there are no chances of electrocution or power outages.
Switches should be positioned at a height
Electrical switches should be placed at a height. This would prevent children from reaching to these switches. To prevent this situation, make sure that the switches are installed at a height. Other than that, you should get switches installed with an external steel interface instead of plastic. Switches with a plastic interface get broker from the outside and this exposes the wires behind it. This can result in a person getting an electrical shock. Switches with an external steel portion do not have this problem.